Differences

This shows you the differences between two versions of the page.

--- uls:install [2021-09-08 17:48]
uls [Debian 10]
+++ uls:install [2024-03-16 10:26] (current)
uls [ULS Basic Configuration]
@@ Line 1: / Line 1: @@
 ===== Download & Installation =====
-Download the {{:uls:uls-server-1.9.2.tgz|}} and
+Download the {{:uls:uls-server-1.9.6-4.tgz|}} and
 follow the installation instruction for different operating systems.
-Remember that have to do
-some configurations before starting to use the ULS-server!
-That is described in [[uls:install#ULS Basic Configuration]] below.
------
-==== Download ====
-The ULS-server is packed as {{:uls:uls-server-1.9.2.tgz|}}
 -----
@@ Line 20: / Line 11: @@
 -----
-=== Debian 10 or Debian 11 ===
+=== Debian 10 to Debian 12 ===
 Install the operating system and chose the software: SSH-server, Standard-system tools
@@ Line 27: / Line 18: @@
 <code bash>
-# apt-get install mariadb-server libmariadb-dev
+# apt-get install mariadb-server libmariadb-dev dh-make
 </code>
@@ Line 35: / Line 26: @@
 <code bash>
 # apt-get install build-essential libssl-dev
 </code>
@@ Line 42: / Line 33: @@
 <code bash>
 # apt-get install gnuplot
-</code>
-Install recode:
-<code bash>
-# apt-get install recode
 </code>
@@ Line 60: / Line 45: @@
 # apt-get install libpng12-0                # may be required on Raspbian
 # dpkg -i wkhtmltox_<version>.deb
+</code>
+Install mailutils for sending mails:
+<code bash>
+# apt-get install mailutils
 </code>
@@ Line 70: / Line 61: @@
 <code bash>
-# tar xf ULS-Server-1.9.6.tgz
+# tar xf ULS-Server-1.9.6-2.tgz
 # cd ULS-Server-1.9.6
 </code>
-Install u2webtools from {{ :unix2web:u2webtools-mariadb_9.7-7debian10_amd64.deb |}} or {{ :unix2web:u2webtools-mariadb_9.7-7debian11_amd64.deb |}}
+Install u2webtools from {{ :unix2web:u2webtools-mariadb_9.7-7debian10_amd64.deb |}}, {{ :unix2web:u2webtools-mariadb_9.7-7debian11_amd64.deb |}} or {{ :unix2web:u2webtools-mariadb_9.9-4debian12_amd64.deb |}}
@@ Line 107: / Line 98: @@
 Now, the ULS-server is running and waits for its base configuration.
-Point your webbrowser to 'htts://localhost/' and login
+Point your webbrowser to 'https://localhost/' and login
-as user 'admin', password 'NewAdmin'. Continue with the {{uls:install#ULS Basic Configuration}}.
+as user 'admin', password 'NewAdmin'.
 -----
@@ Line 119: / Line 111: @@
 :TODO: This may be English or German, depending on your browser settings.
+"Admin-Menü"
+"Verfahren" -> "Verfahren bearbeiten"
+Fill last line and hit OK.
 "Server" -> "Server anlegen"
@@ Line 144: / Line 142: @@
 :TODO: the following is not finished yet.
-"main menu"
-"User" -> "User anlegen"
+"Gruppen" -> "Gruppen anlegen" Gruppenname vergeben "OK"
 Ggf. Button "alle Verfahren", damit das Verfahren des Clients erscheint.
 Haken unter Verfahren setzen.
+"OK"
+"User" -> "User anlegen"
+Haken bei Gruppe setzen.
 "OK"
@@ Line 153: / Line 156: @@
 Install the ULS-client for Linux
-Double-click on file "uls-client_3.14-5debian10_amd64.deb" or "uls-client_3.14-5debian11_amd64.deb" and
+Download file {{ :uls:agents:uls-client_3.14-5debian10_amd64.deb |}}, {{ :uls:agents:uls-client_3.14-5debian11_amd64.deb |}} or {{ :uls:agents:uls-client_3.15-8debian12_amd64.deb |}} and
 install the package using the GDebi installation program.
+Configure the uls-client: Set the ulsserver ip-address or the ulsserver name in /etc/uls/uls.conf.
 <code bash>
 $ vi /etc/uls/uls.conf
 ...
-ULSSERVER=ulsap:11976
+ULSSERVER=<ulsserver>:11976
 </code>
-Check  directory /tmp/uls for files, should look like:
+Check  directory /var/tmp/uls for files, should look like:
 <code bash>
@@ Line 188: / Line 193: @@
 <code bash>
-$ sudo flush_test_values -t
+$ flush_test_values -t
 </code>
@@ Line 194: / Line 199: @@
 To check, if an error condition exists, e.g. "ERROR from ULS-Server: NOSRV",
-which means that the current hostname has not been set up as server.
+which means that the current hostname has not been set up as an ULS-client.
 Setup a user that can access the ULS domain!
@@ Line 203: / Line 208: @@
 ==== Update ====
-Update from version 1.6.0 or newer to version 1.9.2
+Update from version 1.9.2 or newer to version 1.9.5
-Install the u2webtools-9.4.5 from the install package. Unpack {{:uls:uls-update-1.9.2.tgz}} and run the updatescript:
+Install the u2webtools_mariadb-9.7-7 from the "Media Manager". Unpack {{:uls:uls_update-1.9.5.tgz}} and run the updatescript:
 <code bash>
-tar xf uls-update-1.9.2.tgz
+tar xf uls-update-1.9.5.tgz
 cd update
 ./uls_update.sh <db-root-user>
 </code>
-After updates from versions previous to 1.8.0 the user "admin" will have a new password: "NewAdminV1.8".
+After an update to version 1.9.5 and before an update to version 1.9.6 every user should logon to the ULS-server.
+For users without logon under version 1.9.5 an admin user has to reset the password.
+Update from version 1.9.5 to version 1.9.6
+Unpack {{:uls:uls_update-1.9.6.tgz}} and run the updatescript:
+<code bash>
+tar xf uls-update-1.9.6.tgz
+cd update
+./uls_update.sh <db-root-user>
+</code>

Universal Logging System

User Tools

Site Tools

Differences

Page Tools