Universal Logging System

===== Usage =====


==== Start ====

:TODO: Translation

Das Starten des Clusters. Für die Clusterkommunikation wird auf allen Clusterknoten ein unix2webd-Prozess gestartet, zu beachten ist ggf eine Freischaltung des verwendeten Ports in der jeweiligen Firewall der Clusterknoten.

=== SLES ===

Das SCript-CLuster ist so konfiguriert, dass es beim nächsten Reboot des Rechners automatisch gestartet wird. Die Konfiguration des SCript-CLusters (siehe voriges Kapitel) muss vor dem Start des Clusters erfolgen.

Manuelles Starten über:
  # /etc/init.d/sccl_cluster reload
  Config File: /etc/unix2web/sccl.conf
  
  Config File: /etc/unix2web/sccl.conf
  /usr/local/bin/unix2webd -D -p 3579 -h /usr/local/sccl/bin  -r "SCCL Administration" -E -t 300 -U -sp "/usr/local/sccl/bin/u2w_pwd.dat" -or " 10.1.3.113 10.1.3.113"

Dies muss auf jedem Clusterknoten erfolgen. Die Konfigurationsdateien sollten dafür auf allen Clusterknoten gleich sein.

=== HP-UX 11.23 ===

Das SCript-CLuster ist so konfiguriert, dass es beim nächsten Reboot des Rechners automatisch gestartet wird. Die Konfiguration des SCript-CLusters (siehe voriges Kapitel) muss vor dem Start des Clusters erfolgen.

Manuelles Starten erfolgt über
  # /sbin/init.d/sccl_cluster reload
  Config File: /etc/unix2web/sccl.conf
  
  Config File: /etc/unix2web/sccl.conf
  /usr/local/bin/unix2webd -D -p 3579 -h /usr/local/sccl/bin  -r "SCCL Administration" -E -t 300 -U -sp "/usr/local/sccl/bin/u2w_pwd.dat" -or " 10.1.111.11 10.1.111.12 10.0.11.11 10.0.11.12"

Dies muss auf jedem Rechnerknoten erfolgen. Die Konfigurationsdateien sollten für alle Rechnerknoten gleich sein.

-----
==== Commands ====

=== sccl_disable ===
=== sccl_disable_node ===
=== sccl_dist_config ===

  sccl_dist_config [-m] [-x <excludenode>] [-n <onlynode>] [files ...]

Distribute the cluster-relvant files to all other nodes.
Normally, you do not specify any files explicitly.

  sccl_dist_config

Mainly the files:
  etc/sccl/sccl.conf
  etc/sccl/adminpwd.dat
  etc/sccl/userpwd.dat
  etc/sccl/packages.conf
  etc/sccl/resources.conf
  etc/sccl/scripts/
These files will overwrite any existing files on the destination nodes:!:

Special action: define <other_node> also as master.

  sccl_dist_config -m -n <other_node>
  
Remember: only a master node can add more nodes

-----
=== sccl_enable ===
=== sccl_enable_node ===
=== sccl_get_aktnode ===

Find the active cluster node(s) for a cluster package.

  $ sccl_get_aktnode <package>
  { [<node1> [<node2>]...] | 0 }

All names of all cluster nodes are listet, on which the <package> is active. 
If the <package> is not active on any cluster node, the output is:
<file>
0
</file>

Example:
  $ sccl_get_aktnode package3
  clnode1 clnode2

The package package3 is active on the cluster nodes clnode1 and clnode2.
-----
=== sccl_list_cluster ===
=== sccl_list_cluster_nodes ===
=== sccl_list_nodes ===
=== sccl_list_pakete_on_node ===
=== sccl_restart ===
=== sccl_show_cluster ===
=== sccl_start ===
=== sccl_start_node ===
=== sccl_stop ===
=== sccl_stop_node ===
=== sccl_test_res ===



:TODO: more to come

-----

==== Examples ====



=== Example 1 ===

This example script-cluster configuration describes a productive environment 
of:
  * two servers, host001 and host002
    * one application server
    * one database server
  * each server has a package
    * 'tomcat' for the application server
    * 'database' for the database server

This is a very simple example and does not contain any failover functionality.

The following configuration files only show the significantly changed parts or parameters.

<code bash /etc/sccl/sccl.conf>
# Clustername
CLUSTER=SAMPLE01

# Cluster nodes
NODES="host001 host002"
</code>

The package 'tomcat' can only run on host 'host001'.
The package 'database' can only run on host 'host002'.

<code bash /etc/sccl/packages.conf>
# <package>  [-]  <host1> [<host2> [<host3>]...]

# Application
tomcat host001

# Database
database host002
</code>


<code bash /etc/sccl/resources.conf>
# <package>  <package_name>  <resource1> [<resource2> [<resource3]...]

database My_Database   PRG:db_startstop   RST:tomcat:CLUSTER

tomcat Tomcat_Application_Server   CPKG:database:WAIT:3   PRG:tomcat_startstop
</code>

Alternatively you can use:

<code bash /etc/sccl/resources.conf>
# <package>  <package_name>  <resource1> [<resource2> [<resource3]...]

database My_Database   PRG:db_startstop   RST:tomcat:CLUSTER

tomcat Tomcat_Application_Server   CPKG:database:START   PRG:tomcat_startstop
</code>

-----
Universal Logging System

User Tools

Site Tools

Page Tools
